A-1 Plumbing Services
Seattle, WA · 98101 Local. Independent. Toilet specialists.

Flapper Replacement in Seattle, WA Near Me

Toilet flapper replacement in Seattle, WA, matched to your 2-inch or 3-inch flush valve. Call A-1 Plumbing Services at (866) 303-3394.

Call (866) 303-3394 More services
Local plumbers
Repair or replace, your call
Price talked through first
One phone call to book

Flapper Replacement in Seattle, WA

The flapper is the rubber seal at the bottom of the tank. It lifts when you flush and drops back onto the flush valve seat to hold water in. Chlorine, chloramine and hard water slowly harden it, and once it warps, water trickles into the bowl all day.

Flappers are not one size. Most toilets use a 2-inch or a 3-inch flush valve, and plenty of newer high-efficiency models use their own seal that a generic store flapper will not fit. A mismatch is the most common reason a DIY fix keeps running.

A-1 Plumbing Services connects Seattle, WA homeowners with plumbers who match the flapper to the valve, leave about half an inch of slack in the chain, and check the seat for scale or pitting that would make a new flapper leak anyway.

Still running after a new flapper? The seat or the overflow tube is the next stop.

Call A-1 Plumbing Services at (866) 303-3394 to have a flapper replaced in Seattle, WA.

How it works

Getting toilet repair booked in Seattle, WA

01

Tell us what the toilet is doing

Running, rocking, leaking at the base or flushing weak. Each symptom points to a different part.

02

Talk through the price

We go over the likely fix and the price on the phone, then book a local plumber for Seattle, WA.

03

Visit booked

A local plumber comes out at a time that works for you.

04

Fixed and tested

The plumber flushes it several times and checks the base and tank bolts before leaving. You pay the plumber directly.

Coverage

Toilet Repair Services Across Seattle, WA

Toilet repair and toilet installation for the neighborhoods and ZIP codes around Seattle, WA.

Neighborhoods we cover for toilet repair

  • Capitol Hill
  • Ballard
  • Fremont
  • Queen Anne
  • West Seattle
  • University District
  • Belltown

ZIP codes we serve

98101 98102 98103 98104 98105 98106 98107 98108 98109 98112 98115 98116 98117 98118 98119 98121 98122 98125 98126 98133 98134 98136 98144 98146 98148 98154 98155 98158 98164 98166 98168 98174 98177 98178 98188 98195 98198 98199
Flapper Replacement in Seattle, WA

Toilet repair FAQs

Common questions about toilet repair and toilet installation

Questions we hear most often about Flapper Replacement in Seattle, WA.

Talk to a person
How much does toilet repair cost in Seattle, WA?
It depends on the part. Swapping a flapper or fill valve is a small job, while pulling the toilet to replace a flange takes longer and costs more. Ask the plumber for the price before any work starts.
Why does my toilet keep running?
Nine times out of ten it is the flapper, the fill valve set too high, or a lift chain that is too short. A food coloring test in the tank tells you if the flapper is leaking.
What size toilet do I need for my bathroom in Seattle, WA?
Measure the rough-in from the finished wall to the center of the floor bolts. Most homes are 12 inches, and some older houses are 10 or 14 inches. Buy a toilet that matches.
What is the difference between a 1.28 and a 1.6 gallon toilet?
1.6 gallons per flush is the federal maximum. 1.28 gallons is the high-efficiency standard used by WaterSense and required by law in several states, including California, Texas, Colorado and Georgia.
Can a wall-hung toilet be repaired without opening the wall?
Usually yes. Most in-wall tanks have an access panel behind the flush plate, so the fill valve and flush valve can be reached from the front.

Get a toilet repair price

Need Toilet Repair in Seattle, WA? Call now.

Local plumbers for toilet repair and toilet installation in Seattle, WA. Call (866) 303-3394 and go through the job and the price before anything is booked.

Call (866) 303-3394 Browse services
Call (866) 303-3394 Services